DTM Monitor

DTM Monitor

We are a UK Distributor for the DTM Monitor, and the sole UK Distributor for the L8/P8 Cosworth "Pectel" Version of the unit which works on aftermarket firmware.

The DTM Monitor connects to the ECU serial data stream, the information it is displaying is live ECU data, which is why it can show things other monitor can't!

Injector Duty cycle is one good example.Other monitors that are wired directly to the wiring loom, cannot give you this information because they don't know what it is! They just look at the signal wire and guess the values. Engine speed is another, other gauges need to be told if the ECU is wasted spark because they are looking at the trigger wiring for engine speed. The DTM uses ECU data to measure engine speed via the crank sensor. That doesn't change if the car is wasted spark or not!

Self configuring Map sensor type, The DTM looks at the Eprom data to establish which map sensor type is used.

The DTM monitor is different, it tells you exactly what the ecu IS seeing, and porting out the data. Giving us the ability to see live error codes that the ECU produces.

Data logging is another fantastic feature, at the touch of the screen the DTM will data log and recored onto the SD card (Supplied)

We offer full time FREE analysis of this data, to help you tune, fault find, and ensure the car is performing as it should. Done via our email service.

You can set you own gauges 1,4,6 and what they display, Configurable colours, warnings, ECU error codes, as well as all the ECU live data you need to keep an eye on the engine and how it's running.

Available in various languages!

Fully user configurable, touch screen display with in build data logging make the DTM monitor a great tool to have in any Weber equipped car.

This unit connects to the Data stream port (8-11-27) of the Weber ECU and displays various important information, and can keep your engine safe!

*Air Temperature

*Coolant Temperature

*Throttle Position

*Battery Voltage

*Spark Advance

*CO Pot Position

*Lambda Correction

*Injector Duty

*Boost Pressure

*Engine RPM

Plus other configurable options.

With its fully customisable touch screen, The DTM monitor looks great set into the Dash.

Keep an eye on temps, sensor operation, error codes, boost, and pick your own custom displays!

Available from us from £350.00